The Seb Coaxial rest is the finest on the market!

Features :

The innovative "dual post" and "pivotal base" design gives advantages on the pedestal configurations. The rest can be turned and used in any direction and on how you would move the joystick. This is a new concept and the only one in the world!

The dual post coaxial mechanism allows shooter the choice of moving the joystick and the rest top in the same direction, or the opposite direction, simply by attaching the joystick to the opposite side of the coaxial unit.

Rock solid construction throughout.

Approx. 33 M.O.A. - either for vertical or horizontal.

Extremely smooth operation. It's the finest & smoothest in the market!

Joystick sensitivity can be adjusted easily to individual's preference.

No creep or backlash in its movement. The mechanism will remain stationary during recoil, even if you "let go" of the joystick. *The tension is factory set to accept minimum of 13 lbs weight on the rest top.

A built in bubble level located on the rear bar of the rest top.

An adjustable fore end stopper with rubber "O" rings protection. The fore end stopper is secured to the front bar of the rest top.

The solid base has a large footprint, of appropriate thickness and weight. The base blends together with the pivotal base & the coaxial unit to have a perfect balance of weight and stability.

Approximate Measurements :

Base = 32 cm x 38 cm x 3 cm thick (12 1/2” x 15” x 1 1/5”)

Rest (assembled) = 32 cm x 38 cm x 17 cm (12 1/2” x 15” x 7”)

Rest top (inner measurements) = 5,7 cm x 15 cm (2 ¼” x 5 3/4”)

Joystick = 1,27 mm x 28 cm long (1/2” x 11”)

All screws are in standard Metric.

Materials & Aprroximate Weight :
Coaxial unit & rest top = 2,4 kgs (5.2 lbs) Aircraft grade aluminium
Joystick = 0,3 kgs (0.7 lbs) Stainless steel
Rest base & pivotal base = 7,0 kgs (15.4 lbs) Aluminium & stainless steel

Total weight = 9,7 kgs (21.3 lbs)

Standard finish on the base is powder coat, in dark grey (black & silver) hammertone.